Overview
6000W 12V 150A Lead Acid battery charger (Juxon010-6000A) for Electric vehicle, RV. Input: 100-240VAC, 50/60Hz. Built-in silent cooling fan. Aluminum alloy housing. Protection: Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection. CE, RoHS certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-6000A. Rated at 6000W, it targets 12V battery systems. Below we break down what matters for sourcing and integration.
Technical Specifications
| Model | Juxon010-6000A |
|---|---|
| Power | 6000W |
| Battery Voltage | 12V |
| Output Voltage | 14.4V |
| Output Current | 150A |
| Battery Chemistry | Lead Acid |
| Connector | Custom |
| Input Voltage | AC 180V-264V/90V-132V, 50/60Hz |
| Charging Mode | CC/CV (Constant Current / Constant Voltage) |
| Cooling | Built-in silent cooling fan |
| Housing | Aluminum alloy housing |
| Protection | Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection |
| Certifications | CE, FCC, ROHS |
| Applications | Electric vehicle, RV |
| Battery Cells (S) | 2S |
| Dimensions (mm) | 450*300*170 |
| Max Power | 6000W |
| Box Quantity | 1PCS |
| Box Weight | 13KG |
Target Applications
This charger is specified for the following use cases. Matching the charger to the application's duty cycle and environment is the first step in a reliable design.
- E-bike — E-bikes demand lightweight, efficient charging with clean CC/CV termination to protect high-cycle Li-ion packs used in daily commuting.
- Electric vehicle — Light electric vehicles (LEVs) need balanced charge current to protect pack life while keeping charge time reasonable.
- RV — RV and leisure batteries benefit from multi-chemistry chargers that handle lead-acid and lithium alike.
How to Specify This Charger
Battery chemistry. Lead-acid charges in three stages (bulk/absorption/float) to ~2.4–2.45 V/cell and needs float maintenance.
Voltage match. The unit is built for 12V batteries with an end-of-charge output of 14.4V. Confirm your pack's series count against this termination voltage before integration.
Charge current. Rated output current is 150A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.
Connector. Default connector is Custom. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.
Certifications & Compliance
Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:
- CE — CE marking for the European Economic Area.
- FCC — FCC authorization for the United States market.
- ROHS — RoHS compliance restricting hazardous substances.
Protection Features
Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.
OEM / ODM Customization
This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.
Related Chargers
Explore other models in the same family:
Get the 6000W 12V 150A Lead Acid Battery Charger Custom | Juxon OEM
View the full specification sheet, download the datasheet, or request a quotation and engineering samples for your project.
Open the 6000W 12V 150A Lead Acid Battery Charger Custom | Juxon OEM product page →