Overview
53.6v1.8a DC round plug (Segway/Ninebot spec). OEM replacement charger for Segway/Ninebot 36V eBike battery systems. Compatible with: compatible models: Insync Circuit Folding Bike; Forme Buxton, Cromford ELS; Lombardo Evolution, Ischia, Modena, Torino, Viterbo; O2feel Electric Bike, O2feel Pop; Popal E-Bicycles, Popal E-volutionetc.36V MSV/SVMN 5battery. battery: Joycube/Phylion 36Vbattery, 6–15Ah. CE, RoHS certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-100E. Rated at 100W, it targets 48V battery systems. Below we break down what matters for sourcing and integration.
Technical Specifications
| Model | Juxon010-100E |
|---|---|
| Power | 100W |
| Battery Voltage | 48V |
| Output Voltage | 53.6V |
| Output Current | 1.8A |
| Battery Chemistry | Li-ion |
| Connector | Segway/Ninebot DC plug |
| Input Voltage | AC 100-240V, 50/60Hz |
| Charging Mode | CC/CV (Constant Current / Constant Voltage) |
| Protection | Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection |
| Certifications | ROHS |
| Applications | Segway Ninebot 48V锂电池电动滑板车的标准/温和充电；适合城市通勤、日常维护和备用充电。1.8A介于原厂1.3A标准充与3.9A快充之间，充电速度适中且对电池寿命更友好。 |
| Dimensions (mm) | 153*65*35mm |
Target Applications
This charger is specified for the following use cases. Matching the charger to the application's duty cycle and environment is the first step in a reliable design.
- E-scooter — E-scooters rely on compact chargers with reliable thermal management for frequent, short-cycle urban use.
- Segway Ninebot 48V锂电池电动滑板车的标准 — Segway Ninebot 48V锂电池电动滑板车的标准 deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
- 温和充电；适合城市通勤、日常维护和备用充电。1.8A介于原厂1.3A标准充与3.9A快充之间，充电速度适中且对电池寿命更友好。 — 温和充电；适合城市通勤、日常维护和备用充电。1.8A介于原厂1.3A标准充与3.9A快充之间，充电速度适中且对电池寿命更友好。 deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
How to Specify This Charger
Battery chemistry. Li-ion (NMC/LCO) cells charge to ~4.2 V/cell; a 48 V pack terminates near 54.6 V and offers high energy density.
Voltage match. The unit is built for 48V batteries with an end-of-charge output of 53.6V. Confirm your pack's series count against this termination voltage before integration.
Charge current. Rated output current is 1.8A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.
Connector. Default connector is Segway/Ninebot DC plug. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.
Certifications & Compliance
Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:
- ROHS — RoHS compliance restricting hazardous substances.
Protection Features
Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.
OEM / ODM Customization
This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.
Related Chargers
Explore other models in the same family:
Get the 53.6v1.8a Segway/Ninebot Charger OEM
View the full specification sheet, download the datasheet, or request a quotation and engineering samples for your project.
Open the 53.6v1.8a Segway/Ninebot Charger OEM product page →