Overview
500W battery charger (Juxon010-500A) for Mobility scooter, Electric motorcycle, E-scooter, AGV, Golf cart. Output: 11V-77V. Battery: Lead Acid/Li-ion/LiFePO4. Input: 100-240VAC. Protection: SCP, OCP, OVP, OTP, Reverse Polarity. CE, FCC, ROHS certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-500A. Rated at 500W, it targets 11V-77V battery systems. Below we break down what matters for sourcing and integration.
Technical Specifications
| Model | Juxon010-500A |
|---|---|
| Power | 500W |
| Battery Voltage | 11V-77V |
| Output Voltage | 13.2V-89.9V |
| Output Current | 5.6A |
| Battery Chemistry | Lead Acid, Li-ion, LiFePO4 |
| Connector | Custom |
| Input Voltage | AC 180V-264V/90V-132V, 50/60Hz |
| Charging Mode | CC/CV (Constant Current / Constant Voltage) |
| Cooling | Built-in silent DC fan cooling |
| Housing | Aluminum alloy housing |
| Protection | Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection |
| Certifications | CE, FCC, ROHS |
| Battery Voltage Range | 11V-77V |
| Dimensions (mm) | 173*90*51 |
| Max Power | 500W |
| Battery Cells (S) | 3-21 |
Target Applications
This charger is specified for the following use cases. Matching the charger to the application's duty cycle and environment is the first step in a reliable design.
- Mobility scooter — Mobility scooters need safe, silent, low-current charging suitable for assistive daily-use devices.
- Electric motorcycle — Electric motorcycles need higher-current charging and robust protection for larger battery banks and longer range demands.
- E-scooter — E-scooters rely on compact chargers with reliable thermal management for frequent, short-cycle urban use.
- AGV — AGVs (automated guided vehicles) run continuous duty cycles in warehouses, so chargers must support opportunity charging and high uptime.
- Golf cart — Golf carts are shifting from lead-acid to 48V LiFePO4; chargers must match the chemistry's higher end-of-charge voltage.
- Marine — Marine applications need moisture-resistant builds and stable output where salt-air corrosion and vibration are constant risks.
- Forklift — Forklifts require rugged, often high-voltage chargers with strong thermal and reverse-polarity protection for industrial shift operation.
- E-bike — E-bikes demand lightweight, efficient charging with clean CC/CV termination to protect high-cycle Li-ion packs used in daily commuting.
- RV — RV and leisure batteries benefit from multi-chemistry chargers that handle lead-acid and lithium alike.
- Robotics — Service and cleaning robots need compact, efficient chargers for dock-based automatic recharging.
How to Specify This Charger
Battery chemistry. LiFePO4 (LFP) cells charge to ~3.65 V/cell; a 48 V pack terminates near 58.4 V, favouring long cycle life and thermal stability.
Voltage match. The unit is built for 11V-77V batteries with an end-of-charge output of 13.2V-89.9V. Confirm your pack's series count against this termination voltage before integration.
Charge current. Rated output current is 5.6A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.
Connector. Default connector is Custom. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.
Certifications & Compliance
Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:
- CE — CE marking for the European Economic Area.
- FCC — FCC authorization for the United States market.
- ROHS — RoHS compliance restricting hazardous substances.
Protection Features
Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.
OEM / ODM Customization
This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.
Related Chargers
Explore other models in the same family:
Get the 500W Smart Battery Charger 11V-77V Lead Acid/Li-ion/LiFePO4 CE/RoHS
View the full specification sheet, download the datasheet, or request a quotation and engineering samples for your project.
Open the 500W Smart Battery Charger 11V-77V Lead Acid/Li-ion/LiFePO4 CE/RoHS product page →