Understanding the 2000W 36V 35A Ni-MH Battery Charger Custom | Juxon OEM: Specs, Applications & OEM Options

Overview

2000W 36V 40A Li-ion battery charger (Juxon010-2000B) for AGV, Forklift, Golf cart, Electric vehicle, Marine. Input: 100-240VAC. Active cooling fan. Black sealed structure housing. IP65 rated. Protection: Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection, Output Short Circuit Protection. CE, RoHS certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-2000B. Rated at 2000W, it targets 36V battery systems. Below we break down what matters for sourcing and integration.

Technical Specifications

Target Applications

This charger is specified for the following use cases. Matching the charger to the application's duty cycle and environment is the first step in a reliable design.

• AGV — AGVs (automated guided vehicles) run continuous duty cycles in warehouses, so chargers must support opportunity charging and high uptime.
• Golf Cart — Golf carts are shifting from lead-acid to 48V LiFePO4; chargers must match the chemistry's higher end-of-charge voltage.
• Marine — Marine applications need moisture-resistant builds and stable output where salt-air corrosion and vibration are constant risks.
• Forklift — Forklifts require rugged, often high-voltage chargers with strong thermal and reverse-polarity protection for industrial shift operation.
• Energy Storage — Energy Storage deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
• Amusement Equipment — Amusement Equipment deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
• Electric vehicle — Light electric vehicles (LEVs) need balanced charge current to protect pack life while keeping charge time reasonable.
• RV — RV and leisure batteries benefit from multi-chemistry chargers that handle lead-acid and lithium alike.

How to Specify This Charger

Battery chemistry. Li-ion (NMC/LCO) cells charge to ~4.2 V/cell; a 48 V pack terminates near 54.6 V and offers high energy density.

Voltage match. The unit is built for 36V batteries with an end-of-charge output of 42V. Confirm your pack's series count against this termination voltage before integration.

Charge current. Rated output current is 35A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.

Connector. Default connector is Custom. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.

Certifications & Compliance

Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:

• CE — CE marking for the European Economic Area.

Protection Features

Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection, Output Short Circuit Protection are built in to safeguard the battery and the end product during everyday operation.

OEM / ODM Customization

This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.

Related Chargers

Explore other models in the same family:

• 500W Battery Charger 12V-72V Lead Acid Li-ion LiFePO4
• 2000W Ultra Fast Industrial Lithium Battery Charger
• 2000W High Efficiency Industrial Battery Charger 48V-72V
• 800W High Power E-Bike Battery Charger 48V-72V 10A