Understanding the 1200W 72V 15A Lead Acid Battery Charger DC 5.5x2.1mm | Juxon OEM: Specs, Applications & OEM Options

Overview

1200W 72V 15A Lead Acid battery charger (Juxon010-1200A) for E-bike, E-scooter, Mobility scooter, Electric vehi. Input: 100-240VAC. Built-in silent DC fan cooling. Aluminum alloy housing. Protection: Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection. CE, RoHS certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-1200A. Rated at 1200W, it targets 72V battery systems. Below we break down what matters for sourcing and integration.

Technical Specifications

Target Applications

This charger is specified for the following use cases. Matching the charger to the application's duty cycle and environment is the first step in a reliable design.

• E-bike — E-bikes demand lightweight, efficient charging with clean CC/CV termination to protect high-cycle Li-ion packs used in daily commuting.
• E-scooter — E-scooters rely on compact chargers with reliable thermal management for frequent, short-cycle urban use.
• Mobility scooter — Mobility scooters need safe, silent, low-current charging suitable for assistive daily-use devices.
• Electric vehicle — Light electric vehicles (LEVs) need balanced charge current to protect pack life while keeping charge time reasonable.
• RV — RV and leisure batteries benefit from multi-chemistry chargers that handle lead-acid and lithium alike.

How to Specify This Charger

Battery chemistry. Lead-acid charges in three stages (bulk/absorption/float) to ~2.4–2.45 V/cell and needs float maintenance.

Voltage match. The unit is built for 72V batteries with an end-of-charge output of 86.4V. Confirm your pack's series count against this termination voltage before integration.

Charge current. Rated output current is 15A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.

Connector. Default connector is DC 5.5x2.1mm. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.

Certifications & Compliance

Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:

• CE — CE marking for the European Economic Area.
• FCC — FCC authorization for the United States market.
• ROHS — RoHS compliance restricting hazardous substances.

Protection Features

Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.

OEM / ODM Customization

This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.

Related Chargers

Explore other models in the same family:

• 500W Battery Charger 12V-72V Lead Acid Li-ion LiFePO4
• 2000W Ultra Fast Industrial Lithium Battery Charger
• 2000W High Efficiency Industrial Battery Charger 48V-72V
• 800W High Power E-Bike Battery Charger 48V-72V 10A