Understanding the 8000W 48V 110A LiFePO4 Battery Charger DC 5.5x2.1mm | Juxon OEM: Specs, Applications & OEM Options

Overview

8000W 48V 110A LiFePO4 battery charger (Juxon010-8000A) for E-bike, E-scooter, Mobility scooter, Electric vehi. Input: 100-240VAC, 50/60Hz. Natural convection or fan cooling. Aluminum alloy housing. Protection: Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection. CE, RoHS, FCC, KC, CB, TUV, SAA, PSE certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-8000A. Rated at 8000W, it targets 48V battery systems. Below we break down what matters for sourcing and integration.

Technical Specifications

Target Applications

This charger is specified for the following use cases. Matching the charger to the application's duty cycle and environment is the first step in a reliable design.

• E-bike — E-bikes demand lightweight, efficient charging with clean CC/CV termination to protect high-cycle Li-ion packs used in daily commuting.
• E-scooter — E-scooters rely on compact chargers with reliable thermal management for frequent, short-cycle urban use.
• Mobility scooter — Mobility scooters need safe, silent, low-current charging suitable for assistive daily-use devices.
• Electric vehicle — Light electric vehicles (LEVs) need balanced charge current to protect pack life while keeping charge time reasonable.
• RV — RV and leisure batteries benefit from multi-chemistry chargers that handle lead-acid and lithium alike.

How to Specify This Charger

Battery chemistry. LiFePO4 (LFP) cells charge to ~3.65 V/cell; a 48 V pack terminates near 58.4 V, favouring long cycle life and thermal stability.

Voltage match. The unit is built for 48V batteries with an end-of-charge output of 54.75V. Confirm your pack's series count against this termination voltage before integration.

Charge current. Rated output current is 110A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.

Connector. Default connector is DC 5.5x2.1mm. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.

Certifications & Compliance

Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:

• CE — CE marking for the European Economic Area.
• FCC — FCC authorization for the United States market.
• ROHS — RoHS compliance restricting hazardous substances.

Protection Features

Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.

OEM / ODM Customization

This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.

Related Chargers

Explore other models in the same family:

• 500W Battery Charger 12V-72V Lead Acid Li-ion LiFePO4
• 2000W Ultra Fast Industrial Lithium Battery Charger
• 2000W High Efficiency Industrial Battery Charger 48V-72V
• 800W High Power E-Bike Battery Charger 48V-72V 10A