Overview
42V4.0A Yamaha proprietary connector. OEM replacement charger for Yamaha 36V eBike battery systems. Compatible with: Haibike AllMtn 1/2/3/7, HardSeven 6, HardNine 6, AllTrail 4/5/7/9, AllTrack 6/7, Trekking 4/7, Adventr FS 8/10; Winora Yucatan 10; andHusqvarna, Raymon, GASGASusingSimplo/Trendpower InTube 630/720WhbatteryYamahasystem. CE, RoHS certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-180A. Rated at 100W, it targets 36V battery systems. Below we break down what matters for sourcing and integration.
Technical Specifications
| Model | Juxon010-180A |
|---|---|
| Power | 100W |
| Battery Voltage | 36V |
| Output Voltage | 42V |
| Output Current | 4.0A |
| Battery Chemistry | Li-ion |
| Connector | Yamaha 7-pin Type B |
| Input Voltage | AC 100-240V, 50/60Hz |
| Charging Mode | CC/CV (Constant Current / Constant Voltage) |
| Protection | Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection |
| Certifications | FCC |
| Applications | Yamaha中置系统的山地车、旅行车和城市车630/720Wh内置电池快速充电。 |
| Max Power | 168W |
| Dimensions (mm) | 173*73*35mm |
Target Applications
This charger is specified for the following use cases. Matching the charger to the application's duty cycle and environment is the first step in a reliable design.
- E-bike — E-bikes demand lightweight, efficient charging with clean CC/CV termination to protect high-cycle Li-ion packs used in daily commuting.
- Yamaha中置系统的山地车、旅行车和城市车630 — Yamaha中置系统的山地车、旅行车和城市车630 deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
- 720Wh内置电池快速充电。 — 720Wh内置电池快速充电。 deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
How to Specify This Charger
Battery chemistry. Li-ion (NMC/LCO) cells charge to ~4.2 V/cell; a 48 V pack terminates near 54.6 V and offers high energy density.
Voltage match. The unit is built for 36V batteries with an end-of-charge output of 42V. Confirm your pack's series count against this termination voltage before integration.
Charge current. Rated output current is 4.0A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.
Connector. Default connector is Yamaha 7-pin Type B. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.
Certifications & Compliance
Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:
- FCC — FCC authorization for the United States market.
Protection Features
Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.
OEM / ODM Customization
This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.
Related Chargers
Explore other models in the same family:
Get the 42V4.0A Yamaha eBike Charger OEM Replacement
View the full specification sheet, download the datasheet, or request a quotation and engineering samples for your project.
Open the 42V4.0A Yamaha eBike Charger OEM Replacement product page →