Overview
42V2.0A 5-pin TRP trapezoid (Phylion/Joycube). OEM replacement charger for Phylion/Joycube 36V eBike battery systems. Compatible with: Fischer TERRA 2.0(2019and earlier), ETD/ETH 1801, andsomeCITA, MONTIS, VIATOR, EM 1966i; Stella Allegra, Avenza, Azzurro, Durante, Fiore, Forte, Giraldo, Livorno, Modena, Nantes, Novara, Sardena, Verona, Vicenza; Arcade, Sunn, Gitane, Peugeotetc.usingJoycube/Phylion5. CE, RoHS certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-100D. Rated at 100W, it targets 36V battery systems. Below we break down what matters for sourcing and integration.
Technical Specifications
| Model | Juxon010-100D |
|---|---|
| Power | 100W |
| Battery Voltage | 36V |
| Output Voltage | 42V |
| Output Current | 2.0A |
| Battery Chemistry | Li-ion |
| Connector | Phylion/Joycube TRP 5-pin |
| Input Voltage | AC 100-240V, 50/60Hz |
| Charging Mode | CC/CV (Constant Current / Constant Voltage) |
| Protection | Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection |
| Certifications | FCC |
| Applications | 36V Phylion/Joycube后货架或车架电池的日常慢充；适合欧洲城市电助力车、通勤车及轻型货运车。 |
| Max Power | 100W |
| Dimensions (mm) | 153*65*35mm |
Target Applications
This charger is specified for the following use cases. Matching the charger to the application's duty cycle and environment is the first step in a reliable design.
- E-bike — E-bikes demand lightweight, efficient charging with clean CC/CV termination to protect high-cycle Li-ion packs used in daily commuting.
- 36V Phylion — 36V Phylion deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
- Joycube后货架或车架电池的日常慢充；适合欧洲城市电助力车、通勤车及轻型货运车。 — Joycube后货架或车架电池的日常慢充；适合欧洲城市电助力车、通勤车及轻型货运车。 deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
How to Specify This Charger
Battery chemistry. Li-ion (NMC/LCO) cells charge to ~4.2 V/cell; a 48 V pack terminates near 54.6 V and offers high energy density.
Voltage match. The unit is built for 36V batteries with an end-of-charge output of 42V. Confirm your pack's series count against this termination voltage before integration.
Charge current. Rated output current is 2.0A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.
Connector. Default connector is Phylion/Joycube TRP 5-pin. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.
Certifications & Compliance
Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:
- FCC — FCC authorization for the United States market.
Protection Features
Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.
OEM / ODM Customization
This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.
Related Chargers
Explore other models in the same family:
Get the 42V2.0A Phylion/Joycube eBike Charger OEM
View the full specification sheet, download the datasheet, or request a quotation and engineering samples for your project.
Open the 42V2.0A Phylion/Joycube eBike Charger OEM product page →