Quay lại blog 
LiFePO4 Battery Charger: Charging Profile and Selection Guide
Complete guide to LiFePO4 battery chargers: charging voltage (3.65V/cell), CC/CV profile, BMS requirements, and why you need a dedicated LiFePO4 charger.
LiFePO4 batteries need a dedicated charger with the correct charging profile. Here’s why and how to choose.
LiFePO4 Charging Characteristics
- Nominal voltage: 3.2V per cell
- Full charge voltage: 3.65V per cell
- Charging mode: CC/CV (Constant Current / Constant Voltage)
- Recommended current: 0.3C-0.5C
Voltage Reference
| Battery (Nominal) | Cells | Charger V |
|---|---|---|
| 12V LiFePO4 | 4S | 14.6V |
| 24V LiFePO4 | 8S | 29.2V |
| 48V LiFePO4 | 16S | 58.4V |
Why Not Use a Li-ion Charger?
Li-ion chargers charge to 4.2V/cell, but LiFePO4 max is 3.65V/cell. Overcharging LiFePO4 can cause damage. The BMS should cut off, but it’s not safe to rely on.
BMS Requirements
- Over-voltage protection per cell
- Balancing function
- Temperature monitoring
- Charge enable/disable control
Our LiFePO4 Chargers
All Juxon chargers can be configured for LiFePO4 charging profile. Just specify “LiFePO4” when ordering. Contact us for LiFePO4 charger configuration.
Các bài viết liên quan
Xem tất cả → Engineering & Sizing Battery Charger Technical Deep Dive: PFC, Efficiency, Topology and Thermal Design Engineering & Sizing Li-ion vs LiFePO4 Battery Charger: Which One Do You Need? Engineering & Sizing Can I Use a 54.6V Charger for a 48V Battery? Voltage Matching Guide Engineering & Sizing How to Match Charger Voltage and Battery Voltage Correctly
Bạn có cần bộ sạc cho ứng dụng này không? Yêu cầu báo giá OEM/ODM tùy chỉnh.
Yêu cầu báo giá