Understanding the 42V2.0A Rosenberger RoPD eBike Charger OEM: Specs, Applications & OEM Options

Overview

42V2.0A 6-pin magnetic (Rosenberger RoPD). OEM replacement charger for Rosenberger RoPD 36V eBike battery systems. Compatible with: compatible models: Specialized Turbo Como/Vado/Tero/Levo/Kenevo(RoPD 6); Fantic Fat Sport, Integra 160, XF1 Casa/Performance, XEF1.9, XTF 1.5; Rotwild RX/RQ1; Lapierre Overvolt AM 529i/827i/927i; Norco Sight VLT A1 2022(BMZ)etc. CE, RoHS certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-100C. Rated at 100W, it targets 36V battery systems. Below we break down what matters for sourcing and integration.

Technical Specifications

Model	Juxon010-100C
Power	100W
Battery Voltage	36V
Output Voltage	42V
Output Current	2.0A
Battery Chemistry	Li-ion
Connector	Rosenberger RoPD 6-pin
Input Voltage	AC 100-240V, 50/60Hz
Charging Mode	CC/CV (Constant Current / Constant Voltage)
Protection	Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection
Certifications	ROHS
Applications	采用BMZ/Brose/Trendpower等RoPD 6针电池系统的电助力车温和慢充或随车备用充电。
Dimensions (mm)	153*65*35mm

Target Applications

This charger is specified for the following use cases. Matching the charger to the application’s duty cycle and environment is the first step in a reliable design.

• RV — RV and leisure batteries benefit from multi-chemistry chargers that handle lead-acid and lithium alike.
• 采用BMZ — 采用BMZ deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
• Brose — Brose deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
• Trendpower等RoPD 6针电池系统的电助力车温和慢充或随车备用充电。 — Trendpower等RoPD 6针电池系统的电助力车温和慢充或随车备用充电。 deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.

How to Specify This Charger

Battery chemistry. Li-ion (NMC/LCO) cells charge to ~4.2 V/cell; a 48 V pack terminates near 54.6 V and offers high energy density.

Voltage match. The unit is built for 36V batteries with an end-of-charge output of 42V. Confirm your pack’s series count against this termination voltage before integration.

Charge current. Rated output current is 2.0A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.

Connector. Default connector is Rosenberger RoPD 6-pin. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.

Certifications & Compliance

Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:

• ROHS — RoHS compliance restricting hazardous substances.

Protection Features

Short Circuit Protection, Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.

OEM / ODM Customization

This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.

Related Chargers

Explore other models in the same family:

• 300W E-Bike Charger for 24V-72V Battery Projects
• 42V 2A E-Bike Charger - Bosch Compatible with Oval Plug
• 42V 2A 4-Pin XLR E-Bike Charger for QWIC 36V Lithium Battery
• 58.8V 2A E-Bike Charger for 52V Lithium Battery Packs

Get the 42V2.0A Rosenberger RoPD eBike Charger OEM

View the full specification sheet, download the datasheet, or request a quotation and engineering samples for your project.

Open the 42V2.0A Rosenberger RoPD eBike Charger OEM product page →