# 36V E-Bike With Anderson Connector — JUXON OEM/ODM
A 36V e-bike system lives or dies by its charger. JUXON Power, a Shenzhen charger manufacturer since 2014, builds switched-mode Li-ion units from 48W to 8000W, tuned to the exact pack rather than a generic curve. For a 36V e-bike pack the real numbers are 10 cells in series — 36V nominal, 42V at full charge — charged at roughly 1.0A. The guide below uses our product sheet values, not marketing round numbers.
What a 36V e-bike with Anderson connector actually is It is a CC/CV (constant-current / constant-voltage) power supply that takes 100-240V AC and delivers a controlled Li-ion charge. In a 36V system the pack is 10 cells in series (36V nominal, 42V full). The charger must terminate precisely at that point: overshoot cooks cells, undershoot leaves the pack shallow and the vehicle short-ranged. A purpose-built 36V e-bike unit holds the curve across temperature and pack age, which is why a generic laptop brick is a poor substitute.
Specifications that matter (from our product sheet) | Parameter | Value | |---|---| | Output voltage | 36V (Li-ion) | | Pack configuration | 10S (36V nominal / 42V full) | | Typical output | 1.0A (36W) | | Chemistry | Li-ion (also LiFePO4) | | Input | 100-240V AC, 50/60Hz | | Charging mode | CC/CV | | Cooling | Natural convection or fan | | Housing | Black flame-retardant ABS (UL94 V-0) | | Protection | OCP, OVP, OTP, reverse polarity | | Connector | original vehicle / battery connector (by model & battery P / N) HIGO Z311A 3 ≤5A / 60V XLR 3 (only <50V) Rosenberger RoPD 6 | | Reference models | Juxon010-48A, Juxon010-75A, Juxon010-84A, Juxon010-90A and more |
How a 36V Li-ion pack should be charged The charger ramps current to the set value, holds it while voltage climbs (constant current), then holds voltage at 42V while current tapers (constant voltage) until the pack is full. That CC/CV profile is what keeps a 10S Li-ion pack healthy over hundreds of cycles. JUXON adds OVP, OTP and reverse-polarity protection so a wiring mistake trips the supply instead of the battery, and the black UL94 V-0 enclosure keeps it safe in a dusty workshop or a wet marine bay.
Connector: get this right and the rest is easy Our sheet lists connector candidates per pack: original vehicle / battery connector (by model & battery P / N) HIGO Z311A 3 ≤5A / 60V XLR 3 (only <50V) Rosenberger RoPD 6. The rule is simple — match the mating plug, then confirm polarity, pinout and any signal/communication pins before mass production. Because this article centres on the ANDERSON interface, apply the connector selection rule from our engineering table: confirm the plug's rated voltage and current first, then verify polarity and keying — a wrong-keyed ANDERSON will not seat, which is a safety feature, not a defect.
Where a 36V e-bike charger is used E-Bike charging covers lightweight city and commuter e-bikes. From the product sheet: indoor home, office, service stores and small-equipment; slow-charge, backup and service of small packs. JUXON's standard catalog shows e-bike, forklift, mobility and marine models, but we regularly design e-bike units to a customer's exact voltage, current and connector — see the e-bike product page.
How JUXON builds it (OEM / ODM) JUXON Power is a professional lithium battery charger manufacturer based in Shenzhen, Guangdong, China, operating since 2014 across 48W to 8000W with 400+ charger models shipped to 60+ countries. The engineering team runs the full chain — schematic, PCBA, thermal management, enclosure tooling and end-to-end certification — so a 36V e-bike charger arrives as a drop-in unit matched to your chemistry and form factor. Low-moq runs with fast sampling (prototypes in 7-10 days).
Certifications for your market For this Li-ion 36V class, typical certifications on the build are CE, RoHS. The full portfolio JUXON supports end-to-end includes CE (EU), RoHS (EU/eco), UKCA (UK), UL (USA/Canada), TÜV (Germany/EU), TÜV GS (Germany), PSE (Japan), KC (South Korea), plus ISO 9001 / ISO 14001 factory systems. Tell us the target market and we map the exact marks before tooling.
How to size a 36V e-bike charger Rule of thumb: charge at 0.2C-0.3C of pack capacity. A 20Ah Li-ion 36V pack → about 4-6A; a 100Ah bank → 20-30A. Size the charger to the pack, not the vehicle's peak draw, and leave thermal margin for summer parking or sealed enclosures. If you are unsure, send the pack label — we return a matched model and a quote, usually within one business day.
Pre-production checklist Before committing to a 36V e-bike build, lock down four things: (1) pack nominal and full-charge voltage; (2) cell count and chemistry (Li-ion); (3) the exact mating connector, polarity and any communication pins; (4) target-market certifications. Email those on one line and we return a matched Juxon010-series model with a quote, usually within one business day.
FAQ Q: What voltage does a 36V Li-ion charger actually output? A: It charges to the pack's full-charge voltage — 42V for a 10S Li-ion pack (nominal 36V). The 'charger voltage' is always higher than the nominal rating.
Q: Can one 36V charger serve both Li-ion and other chemistries?
A: No. Li-ion needs its own CC/CV cutoff. Mixing chemistries on one curve damages cells; we build separate profiles or a selector.
Q: Which connector fits a e-bike pack?
A: It depends on the mating plug. Our sheet lists candidates per pack (XLR, Anderson, DC barrel, M16/GX16 and more); send a photo of the connector and we confirm polarity and pinout.
Q: What certifications apply to my market?
A: CE, RoHS are typical for this class; CE, RoHS, UL cover EU/US broadly, with PSE (Japan), KC (Korea), SAA (AU/NZ) and CCC (China) by market.
Q: What is the MOQ and lead time?
A: JUXON runs low-MOQ runs with fast sampling (prototypes in 7-10 days); standard OEM runs ship in roughly 15-25 days after sample sign-off.
> Get a matched 36V e-bike charger quote
> Share your battery pack voltage, capacity and connector. JUXON replies with a matched model and quotation within 1 business day.
> Request a Quote · WhatsApp +86 19501872679 · kevin@juxonpower.com / lee@juxonpower.com