Understanding the 90W E-Scooter Charger 24V 3A Compact OEM Available: Specs, Applications & OEM Options

Overview

90W 24V 3A Li-ion battery charger (Juxon010-90A) for E-bike, E-scooter, Mobility scooter, Electric vehi. Input: 100-240VAC. Natural convection or fan cooling. Black flame-retardant ABS plastic (UL94 V-0). Protection: Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection. CE, RoHS, FCC, KC, CB, TUV, SAA, PSE certified. OEM/ODM custom voltage, connector & label available. It is offered under the model Juxon010-120B/Juxon010-120A. Rated at 85W, it targets 25.2V battery systems. Below we break down what matters for sourcing and integration.

Technical Specifications

Model	Juxon010-120B/Juxon010-120A
Power	85W
Battery Voltage	25.2V
Output Voltage	29.4V
Output Current	3A
Battery Chemistry	Li-ion
Connector	Custom
Input Voltage	AC 100-240V, 50/60Hz
Charging Mode	CC/CV (Constant Current / Constant Voltage)
Cooling	Natural convection or fan cooling
Housing	Black flame-retardant ABS plastic (UL94 V-0)
Protection	Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection
Certifications	CCC, CE, ETL, KC, PSE, SAA, UKCA, UL
Applications	E-bike, E-scooter, Mobility scooter, Electric vehicle, RV
Battery Cells (S)	7S
Dimensions (mm)	140.5*59.5*31.5
Max Power	85W
Box Quantity	50PCS

Target Applications

This charger is specified for the following use cases. Matching the charger to the application’s duty cycle and environment is the first step in a reliable design.

• E-bike — E-bikes demand lightweight, efficient charging with clean CC/CV termination to protect high-cycle Li-ion packs used in daily commuting.
• E-scooter — E-scooters rely on compact chargers with reliable thermal management for frequent, short-cycle urban use.
• Wheelchair — Wheelchair deployments benefit from a charger matched to the duty cycle, environment, and battery chemistry of the application.
• Mobility scooter — Mobility scooters need safe, silent, low-current charging suitable for assistive daily-use devices.
• Electric vehicle — Light electric vehicles (LEVs) need balanced charge current to protect pack life while keeping charge time reasonable.
• RV — RV and leisure batteries benefit from multi-chemistry chargers that handle lead-acid and lithium alike.

How to Specify This Charger

Battery chemistry. Li-ion (NMC/LCO) cells charge to ~4.2 V/cell; a 48 V pack terminates near 54.6 V and offers high energy density.

Voltage match. The unit is built for 25.2V batteries with an end-of-charge output of 29.4V. Confirm your pack’s series count against this termination voltage before integration.

Charge current. Rated output current is 3A. As a rule of thumb, charge time (hours) ≈ battery capacity (Ah) ÷ current (A) × 1.2 for the CV taper. Size current to your acceptable charge window and pack longevity target.

Connector. Default connector is Custom. Custom connectors and harnesses are available under OEM/ODM to match your existing harness.

Certifications & Compliance

Certification availability depends on the exact model and target market. The listed marks indicate the compliance scope supported for this product family:

• CCC — CCC certification mandatory for many products sold in China.
• CE — CE marking for the European Economic Area.
• ETL — ETL certification support for the relevant target market.
• KC — KC marking required for South Korea.
• PSE — PSE certification required for the Japanese market.
• SAA — SAA / RCM compliance for the Australian and New Zealand market.
• UKCA — UKCA certification support for the relevant target market.
• UL — UL certification (safety) widely required for North American retail and OEM programs.

Protection Features

Over Current Protection, Over Voltage Protection, Over Temperature Protection, Reverse Polarity Protection are built in to safeguard the battery and the end product during everyday operation.

OEM / ODM Customization

This charger is supplied as an OEM/ODM component. Typical customizations include output voltage and current tuning, connector and harness matching, enclosure and label branding, and firmware/indicator adjustments for your product line. Low-volume trial batches and full-production runs are both supported for qualified B2B projects.

Related Chargers

Explore other models in the same family:

• 67.2V 2A 3-Pin XLR Battery Charger for 60V Lithium Battery
• 54.6V 2A 3-Pin XLR Battery Charger for 48V Lithium Battery
• 54.6V Electric Scooter Charger for 48V Lithium Battery
• 48W Mini E-Scooter Battery Charger 24V 1.5A Compact Design

Get the 90W E-Scooter Charger 24V 3A Compact OEM Available

View the full specification sheet, download the datasheet, or request a quotation and engineering samples for your project.

Open the 90W E-Scooter Charger 24V 3A Compact OEM Available product page →